ET 66 - ET 66 M operator’s manual
GENERAL CONDITIONS OF USE
The ET 66 balancer must be used exclusively to measure unbalance in terms of entity
and position on truck and car wheels within the limits specified in the “Technical
Brief”.
ATTENTION
Any use of the machine other than the described use is to be considered as improp-
er and unreasonable.
WARNING
It is forbidden to start the machine without the equipment for blocking the wheel.
WARNING
Cleaning or washing the machine with compressed air or jets of water is forbidden.
ATTENTION
It is strictly prohibited to alter the pressure setting of the relief valves or the pres-
sure limiter.
The manufacturer declines all liability for damage if the valves have been tampered
with.
ATTENTION
It is advised not to use only CORGHI original tools for the work.
WARNING
Get to know your machine. The best way to prevent accidents and obtain top
performance from the machine is to ensure that all operators know how it works.
Learn the function and location of all commands.
Carefully check that all the commands on the machine are working properly.
To avoid accidents and injury, the machine must be installed properly, operated
correctly and serviced regularly.
Грузик - все для шиномонтажа www.gruzik.com.ua
To Next Page