ET 66 - ET 66 M operator’s manual
INTRODUCTION
The purpose of this manual is to furnish the owner and operator of this Corghi machine
with a set of practical and safe instructions for the use and maintenance of the ET 66
and ET66M balancer. Follow all the instructions carefully and your balancer will assist
you in your work and give lasting and efficient service in keeping with CORGHI tradi-
tions.
The following paragraphs define the levels of danger regarding the machine associated
with the warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of serious injury or death.
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Read these instructions carefully before powering up the machine. Conserve this
manual and all illustrative material supplied with the machine in a folder near the
balancer where it is readily accessible for consultation by the machine operator.
The technical documentation supplied is considered an integral part of the machine;
in the event of sale all relative documentation must remain with the jack.
The manual is only valid for the machine model and serial number indicated on the
nameplate applied to the machine itself.
WARNING
Adhere to the contents of this manual: Corghi declines all liability in the case of
actions not specifically described and authorised in this manual.
NOTE
Some of the illustrations in this manual have been taken from photographs of proto-
types; the standard production model may differ slightly in certain respects.
These instructions are for the attention of persons with basic mechanical skills. We
have therefore condensed the descriptions of each operation by omitting detailed
instructions regarding, for example, how to loosen or tighten the fixing devices on the
machine. Do not attempt to perform operations unless properly qualified and with
suitable experience. In case of need, please contact our nearest authorised Service
Centre for assistance.
All rights reserved. No part of this publication may be translated, stored in an electronic retrieval system, reprodu-
ced, or partially or totally adapted by any means (including microfilm and photostats) without prior permission.
The information contained herein may be subject to modifications without prior notice.
Грузик - все для шиномонтажа www.gruzik.com.ua
To Next Page
Loading...