Corghi ET 66 - Page 6

ET 66 - ET 66 M operator’s manual
suitable lock-out device to restrict machine use exclusively to qualified personnel.
WARNING
For correct and safe operation, the machine must be suitably earthed.
NEVER connect the earth to a gas pipe, water pipe, telephone line or other make-
shift system.
COMPRESSED AIR HOOK-UP
WARNING
Everything involved in the compressed air hook-up should only be done by special-
ised personnel.
- Hook-up to the shop compressed air circuit should insure a minimum pressure of 8
bar. Lower pressure could compromise the correct performance of pneumatic
equipment.
- The machine is fitted with a universal connector and therefore no other special or
additional fitting is called for. A high pressure rubber air hose (int. dia.6 mm; ext.
dia.14 mm) should be pushed all the way onto the connector and secured with a
screw clamp supplied in the machine kit.
Грузик - все для шиномонтажа www.gruzik.com.ua