Corghi HD 700 - Machine Handling and Storage

- EnglIsh- Operator's manual HD 700 39
UK
CAUTION
Before handling the machine, compare its
weight with the capacity of the wheel lifter
you have chosen.
To move the packaged machine, insert the tines
of a fork-lift truck into the slots on the base of
the packaging itself (pallet) (Fig. 2).
CAUTION
The packaged machine must not be lifted using
a crane or hoist (Fig. 3).
Use the hooking point to handle the machine
without its packaging (1, Fig.4).
MACHINE HANDLING
AND STORAGE
Machines in their packaging must be stored in a
dry place, with ventilation if possible.
Place the packs far enough apart to allow the
information provided on the sides of the pack-
aging to be read easily.
CAUTION
Do not stack more than two packs to avoid
damaging them.
- Packaging dimensions: (fig. 1). .....
• Depth (B) ......................................... 2000 mm
• Width (A) .......................................... 1720 mm
• Height (C) ......................................... 1030 mm
- Weight
• Machine with packaging ......................615 kg
• Machine .................................................555 kg
- Ambient temperature for storing the equip-
ment: ..............................................-25° - +55°C
Handling
CAUTION
Carry out carefully the assembly and handling
operations described. Failure to observe these
instructions can damage the machine and
compromise the operator's safety.
A
B
C
1
2
3