Cornelius 255 - Lid Installation (with Icemaker)

4.
Close the lid and cover the rest of the bin.
Figure 4.
Adapter Lid For 255/215 - Installation Instructions
Publication Number: 548000078INS - 4 - ©2018, Cornelius Inc.
LID INSTALLATION (WITH ICEMAKER)
Table 2: Lid Installation (With Icemaker)
Step Action Figures
1.
You will need to identify the ice maker brand and
model number. Refer to the cut-off schematic,
you will have to cut the lid according to the color
line matching the ice maker spec.
Figure 5.
2.
Use a box knife or a hand tool, to cut the corre-
sponding lines.
Figure 6.
3.
After cutting the lid, use your finger and a flat
screw driver to remove the unwanted part of the
lid.
Figure 7.