your selection.
2.2.4.4 This machine is now set to weld.
2.2.4.4.1 Use the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB to fine tune wire feed speed.
2.2.4.4.2 Use the VOLTAGE CONTROL KNOB to fine turn
voltage.
2.2.4.5 You can adjust other parameters:
2.2.4.5.1 Press the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB. Wire Speed will no
longer be highlighted but will have a box around it. Turn
the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB to go through other options. Press the
MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB
to adjust the highlighted Option.
2.2.5 MIG Manual – Choose this option if you prefer to make all settings manually.
2.2.5.1 This machine is now set to weld.
2.2.5.1.1 Use the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB to fine tune wire feed speed.
2.2.5.1.2 Use the VOLTAGE CONTROL KNOB to fine turn
voltage.
2.2.5.2 You can adjust other parameters:
2.2.5.2.1 Press the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB. Wire Speed will no
longer be highlighted but will have a box around it. Turn
the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB to go through other options. Press the
MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB
to adjust the highlighted Option.
2.2.6 Saving A MIG Program:
2.2.6.1 Your MIG welding programs can be saved and called up at a later
time.
2.2.6.1.1 Test your welding parameters to make certain you wish
to save this set-up
2.2.6.1.2 Press the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB to deselect the wire
speed feed parameter adjustments
2.2.6.1.3 Turn the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB until you get to
MEMORY SAVE.
2.2.6.1.4 Press the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB to access the
MEMORY SAVE.
2.2.6.1.5 Turn the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB to choose the file
number you wish to use to save this set-up. Press the
MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB
to confirm. Press the MULTI-FUNCTION
To Next Page
Loading...
