Need help?Do you have a question about the corob PPG MoonWalk and is the answer not in the manual?
Explains the manual's purpose, intended use, and importance.
Provides key terms and definitions for operators and technicians.
Overview of the Moon Walk dispensing system and its main components.
Details about toner pumping groups, racks, carriage, and peripheral devices.
Specifications for compatible mixing cups, including dimensions and weight.
Defines the machine's proper use and outlines potential improper applications.
Information about the machine's identification plate and its contents.
Mandatory safety precautions and prohibitions for machine operation.
Safety guidelines and precautions when handling dispensing products.
Identifies potential risks and corresponding preventive measures during operation.
Locates and identifies all safety and instruction labels on the machine.
Details the various safety devices integrated into the machine and their function.
Specifies environmental and site requirements for safe machine installation.
Outlines operations that must be performed by authorized personnel only.
Guidelines for storing the machine when not in use.
Instructions for disposing of the machine at the end of its lifecycle.
Essential safety warnings and requirements before initial machine power-up.
Identifies and explains the machine's control devices, switches, lamps, and connections.
Explains the meaning of different LED indicators signaling machine status.
Details the correct electrical connection procedures and initial start-up warnings.
Step-by-step instructions for safely shutting down the machine.
Reiterates critical safety warnings and general operational guidelines.
Daily checks and procedures to perform before starting operations.
Describes the sequence of steps guided by the software for a dispensing job.
Detailed process of selecting formula, loading toners, and executing dispensing.
How to manually update product levels for each toner.
Function to save the machine configuration for diagnostic purposes.
Configuration options for machine behavior and operation.
Options to configure the toner dispensing sequence and display modes.
Allows changing the program's operating language.
How to adjust toner positions in the visual stock view.
Commands for dispenser, scale, and barcode scanner operations.
Commands for resetting, moving, dosing, recirculating, and valve control.
Commands for tare, weigh, and reset operations for the scale.
Commands for scanning barcodes, aborting, positioning, and resetting.
Step-by-step guide for replacing an empty toner bottle using the station.
Safety warnings and precautions for performing maintenance operations.
Table outlining recommended maintenance operations and their frequency.
Recommended and prohibited cleaning products for the machine.
General procedures for cleaning machine parts and internal areas.
Instructions for cleaning safety guards and polycarbonate parts.
Procedures for cleaning drip trays and the weighing scale.
Steps for cleaning the bottle replacement station's drip tray.
Guide on how to replace a pumping group, including gasket and airpipe installation.
Lists technical specifications like power, frequency, noise level, and environment conditions.
Provides physical dimensions and weight of machine modules and the complete unit.
Refers to appendix for conformity declaration documents.
Lists spare parts that may affect health and safety during operation.
Identifies spare parts that users can replace independently.
To Next Page
General
