Need help?Do you have a question about the corob Tatocolor and is the answer not in the manual?
Provides crucial safety instructions for operating the COROB™ TATOCOLOR dispenser.
Lists potential hazards and their corresponding preventive measures.
Explains the dispensing center, nozzle, and electrovalves.
Lists electrical, environmental, and dimensional specifications of the machine.
Outlines dispensing system, accuracy, and component specifications.
Defines authorized use and prohibits unauthorized operations of the dispenser.
Details the safety devices incorporated into the machine, like the enabling button.
Details environmental and electrical requirements for correct installation.
Explains the process of filling canisters and initial machine startup.
Guides on connecting the computer and installing management software.
Details the importance and procedure for calibrating dispensing circuits.
Explains how to connect power and successfully start the machine.
Describes the preparatory phase for machine setup and configuration.
Provides instructions on how to properly shut down the machine.
Instructions for operating the COROB™ TATOCOLOR TB model.
Explains the dispensing process and safety during operation for the TB model.
Instructions for operating the COROB™ TATOCOLOR TA model.
Explains the dispensing process for the TA model.
General safety precautions for performing maintenance on the dispenser.
Specific safety warnings related to colorant handling during maintenance.
Procedure for cleaning the nozzle center for precise dispensing.
Information on maintaining pump filters to ensure machine performance.
Safety precautions and general information for using the service computer.
To Next Page
General
