3-FEATURES 3-1
COROB™ TATOCOLOR
3 FEATURES
3.1 General description
The COROB™ TATOCOLOR automatic dispenser allows simultaneous and automatic dispensing
(or distribution) of colorants into containers pre-filled with base product, to create paints, dyes,
enamels, and inks of the desired hue, chosen by means of the machine management program.
COROB™ TATOCOLOR is a single-unit machine with a maximum of 16 dispensing circuits,
divided into three main parts: the central dispensing section, the right side canister section and
the left side canister section.
COROB™ TATOCOLOR is available with sheet metal or ABS panels.
The dispenser is fully managed by a normal personal computer. The manufacturer supplies a wide
range of software applications to manage all of the machine's functions.
The computer may be supplied upon request.
COROB™ TATOCOLOR is available in two models:
COROB™ TATOCOLOR TB
COROB™ TATOCOLOR TA
3.1.1 COROB™ TATOCOLOR TB
COROB™ TATOCOLOR model TB is equipped with manual shelf and humidifier cap (sliding cap or
automatic sliding cap). The machine is made up of (Figure 3-1):
1. Central dispensing section
2. Right side canister section
3. Left side canister section
Figure 3-1 - COROB™ TATOCOLOR with sheet metal panels - model TB
3
1
2
To Next Page
Loading...
