2-GENERAL INFORMATION 2-7
COROB™ TATOCOLOR
2.6 Definitions
2.6.1 Operator - Machine interaction
The table below gives a list of operator-machine interactions.
DANGEROUS AREA
This refers to any area inside and/or near the machine in which the
presence of an exposed person constitutes a risk to the safety and
health of the person.
EXPOSED PERSON
This refers to any person fully or partly located within a dangerous
area.
OPERATOR AREA
This is where the operator may be safely located while the machine is
running. The operator can control all machine operations from this
position.
MACHINE STATUS
Status refers to the operating mode or status of the safety devices
installed on the machine.
NUMBER OF OPERATORS
Indicates the number of employees needed to carry out a given
function properly. Use of a greater or lesser number of people could
make it impossible to achieve the expected results, or be hazardous
to the personal safety of the personnel involved.
2.6.2 Personnel qualifications
Indicates the minimum qualification level according to the table below.
OPERATOR
A person familiar with the use of colorants to produce paints or
similar products, assigned to operate and use the machine by its
controls and to load and unload production materials with all safety
devices enabled. He or she must work only in safety conditions.
MAINTENANCE
TECHNICIAN
Specialist prepared and trained in a technical field (mechanical and
electrical) and assigned to work on the machine to perform
adjustments, repair breakdowns or carry out maintenance.
2.7 Fire extinguishing means to be used
If the machine catches fire, you must use dry powder or carbon dioxide fire extinguishers. Never
use water.
Carefully follow the instructions and warnings indicated by the manufacturer and listed on the
extinguisher.
2.8 Declaration of conformity
See Declaration of conformity attached.
To Next Page
Loading...
