corob Tatocolor - General Information; General Safety Warnings; Residual Risks

2-GENERAL INFORMATION 2-1
COROB™ TATOCOLOR
2 GENERAL INFORMATION
2.1 General safety warnings
This COROB™ dispenser has been designed and manufactured in observance of essential safety
requirements; the CE marking certifies its compliance.
All measures and precautions were taken during its design, manufacture, testing and installation
to ensure the highest possible level of safety considering rational use of the machine.
The warnings listed below are to be considered general in nature; specific safety
instructions related to the type of intervention to be carried out and the type of accessories
installed on the machine are given in detail in the specific paragraphs.
READ THE SAFETY WARNINGS CAREFULLY BEFORE USING THE MACHINE
WARNINGS
 Do not perform any type of work on the machine before you have read and understood the
instructions in this manual.
 Pay close attention to the warning signs on the machine.
 It is strictly forbidden to bypass or disable the protections and any safety devices present on
the machine.
 THE MACHINE IS NOT EXPLOSION-PROOF AND MUST NOT BE USED IN AREAS AT
RISK FOR EXPLOSION.
 The machine must be used only for its intended purpose.
 The machine is suitable for use with tinting products in general. Scrupulously follow the
safety precautions and the instructions for use given on the colorant package and on the
safety data sheet supplied by the manufacturer. When compulsory, use personal protection
equipment for eyes and hands.
 When using colorants containing volatile solvents, do not use naked flames,
electrical tools or other types of devices that could cause sparks or fire hazards
close to the machine.
 The packing must be handled only by skilled personnel using appropriate handling equipment
and according to the instructions given in the corresponding chapter.
 During routine maintenance operations, scrupulously follow the safety instructions given in
the corresponding chapters before accessing the dangerous area.
 The rear door and panels must be kept closed at all times.
 Only qualified or appropriately trained personnel are authorized to access the
electrical and mechanical parts of the machine for maintenance and repairs.
 Unauthorized personnel are forbidden to remove the panels and access the
electrical and mechanical parts of the machine.
 The panels and the rear door are not equipped with safety limit switches; the key to open the
panels and rear door must be kept only by the qualified personnel assigned to carry out
machine maintenance.
 Always unplug the power supply cable from the socket outlet before carrying out any
maintenance operations.
 In the absence of colorant, the machine pumps contain a lubricant oil that could contaminate
the colorant in the canisters during the stages of machine installation and first start-up; we
therefore urge you to carefully follow the installation instructions when filling the canisters for
the first time.