corob Tatocolor - Warranty

2-6 2-GENERAL INFORMATION
COROB™ TATOCOLOR
5. year of manufacture
6. serial number
7. electrical specifications
8. internal codes
Do not remove or tamper with the identification plate in any way.
Figure 2-3
2.5 Warranty
In order for the warranty to be valid, please complete the form included in the machine packing,
and send it to the address listed on the form itself.
Contact our authorized, qualified personnel only for all your service needs. Use only original
spare parts for all maintenance and repairs.
Altering or removing the guards and safety devices provided on the machine will not only
void the warranty immediately, but is also dangerous and illegal. The manufacturer may
not be held liable for personal injury or property damage caused by improper use of the
equipment or tampering with the guards and safety devices installed on the machine.
The following shall void the manufacturer's warranty:
 improper use of the machine
 failure to observe the instructions and maintenance rules set forth in the manual
 making or having changes and/or repairs made on the machine by personnel outside the
service organization authorized by the manufacturer
 making or having changes and/or repairs made using non-original spare parts
In the event of serious breakdowns, or if the user does not feel it appropriate to
intervene directly, contact a service center authorized by the manufacturer.
1
2
3
4
5
6
7
8