corob Tatocolor - 8 ORDINARY MAINTENANCE (by the User); General Warnings; Warnings on the Use of Colorants

8-ORDINARY MAINTENANCE 8-1
COROB™ TATOCOLOR
8 ORDINARY MAINTENANCE (by the user)
8.1 General warnings
Performing ordinary maintenance regularly ensures safe, reliable machine operation.
Before carrying out any ordinary maintenance operations, you must turn off the machine
and unplug the power supply cable from the mains socket outlet.
The frequencies indicated are approximate, since they depend on the type of colorants and
environment conditions.
Make sure to use products compatible with the type of colorants in the machine when:
cleaning the nozzle center - moistening the humidifier cap sponge - cleaning the filters.
Type of colorant: Use:
Solvent-based colorants slow-evaporating solvent, compatible with the colorants used
Water-based colorants water
Mixed systems
the choice depends on the type of vehicles used to produce the
colorants; this choice may be made directly by the customer's product
development laboratory or, alternatively, by the COROB S.p.A.
laboratory after examining the formulas and a few samples of the
products used.
During the maintenance operations described below, follow the safety instructions given; refer to
chapter 2.6 for further clarification of the definitions.
Machine status: shut off and unplugged from the power source
Number of operators: 1
Qualification: operator
8.1.1 Warnings on the use of colorants
During machine maintenance operations there is a high risk of contact with the
coloring products; carefully read the SAFETY DATA SHEET that the dealer or
manufacturer of the product is required to provide, and observe all of the safety
instructions provided.
Below are some of the most common warnings and safety precautions provided by colorant
manufacturers.
Harmful if swallowed.
Avoid eye and skin contact. In case of eye and skin contact, rinse with plenty of water.
Keep out of the reach of children.
When compulsory, use personal protection equipment for eyes and hands.
In case of accidental product leaks or spills, thoroughly ventilate the area and clean immediately
with water.
Do not dispose of colorant in the sewage system. Follow local regulations when disposing of
waste.