corob Tatocolor - Default Chapter; Table of Contents

CONTENTS 0-3
COROB™ TATOCOLOR
CONTENTS
1 INTRODUCTION ................................................................................................... 1-1
1.1 Purpose and use of this manual ......................................................................... 1-1
1.2 Conventionally used graphics ............................................................................ 1-1
2 GENERAL INFORMATION ...................................................................................... 2-1
2.1 General safety warnings ................................................................................... 2-1
2.2 Residual risks ................................................................................................. 2-2
2.3 Position of labels ............................................................................................. 2-4
2.4 Identifying information and reference standards .................................................. 2-5
2.5 Warranty ....................................................................................................... 2-6
2.6 Definitions ..................................................................................................... 2-7
2.6.1 Operator - Machine interaction ................................................................. 2-7
2.6.2 Personnel qualifications ........................................................................... 2-7
2.7 Fire extinguishing means to be used .................................................................. 2-7
2.8 Declaration of conformity ................................................................................. 2-7
3 FEATURES ............................................................................................................ 3-1
3.1 General description ......................................................................................... 3-1
3.1.1 COROB™ TATOCOLOR TB ........................................................................ 3-1
3.1.2 COROB™ TATOCOLOR TA ........................................................................ 3-2
3.2 Description of groups ....................................................................................... 3-2
3.2.1 Canister section ..................................................................................... 3-2
3.2.2 Dispensing section .................................................................................. 3-3
3.2.3 Shelf for can positioning .......................................................................... 3-4
3.2.4 Humidifier cap ........................................................................................ 3-5
3.2.5 Punch & plugger - TATOCOLOR TA only ...................................................... 3-6
3.3 Technical specifications .................................................................................... 3-7
3.4 Performance and characteristics of the machine ................................................... 3-8
3.5 Cans to be handled.......................................................................................... 3-8
3.5.1 COROB™ TATOCOLOR TB ........................................................................ 3-9
3.5.2 COROB™ TATOCOLOR TA ........................................................................ 3-9
3.6 Minimum computer requirements ...................................................................... 3-9
3.7 Intended and improper use ............................................................................... 3-9
3.8 Safety devices .............................................................................................. 3-10
4 SHIPPING, HANDLING AND UNPACKING ............................................................. 4-1
4.1 General warnings ............................................................................................ 4-1
4.2 Moving and handling the packed machine ........................................................... 4-1
4.3 Environment conditions of the installation site ..................................................... 4-1
4.4 Unpacking and placement................................................................................. 4-2
4.5 Moving and handling the unpacked machine ........................................................ 4-5
4.6 Storage ......................................................................................................... 4-5
4.7 Product disposal and recycling .......................................................................... 4-6
5 INSTALLATION (by qualified personnel) .............................................................. 5-1
5.1 General warnings ............................................................................................ 5-1
5.2 Conditions for proper installation ....................................................................... 5-1
5.3 Installing accessories ....................................................................................... 5-1
5.3.1 Mounting the support plate for the computer .............................................. 5-1
5.4 Canister filling and first machine startup ............................................................. 5-2
5.4.1 Purge procedure ..................................................................................... 5-2
5.4.2 Colorant recirculation procedure ............................................................... 5-3
5.5 Connecting the computer and installing the software ............................................ 5-3
5.5.1 Installing the keyboard (only model TB, with sheet metal panels) .................. 5-5
5.5.2 Machine configuration through the management program ................................ 5-5
5.6 Moistening the cap sponge ............................................................................... 5-5