6-4 6-START-UP
COROB™ TATOCOLOR
6.4 Shut-down
WE RECOMMEND THAT YOU NEVER SHUT DOWN THE MACHINE, even when closed
for business, because the automatic, timed recirculation and stirring functions help keep
the colorant preserved and homogeneous.
Should it be essential to shut down the machine, avoid keeping it off for extended periods
of time. When the machine is not being used, shut off only the computer.
To shut off the machine proceed as follows:
1. After carrying out the computer shut-down procedure, shut off the machine by setting the
main switch to the OFF position (O).
2. Unplug the power supply cable from the mains socket outlet.
For occasional and temporary needs to shut off the machine, press the ON-OFF button.
Pressing the ON-OFF button does not cause all the electrical circuits to be isolated from the
mains voltage, but only isolates the electronic control devices (power supply unit, inverter, etc.).
The auxiliary sockets still remain powered.
To Next Page
Loading...
