NOTE: THE FIXED BASELINE METHOD WORKS BY ASSUMING THAT THE DISTANCE BETWEEN CAMERA SENSORS HAS NOT
CHANGED. THIS IS A GOOD APPROXIMATION WHEN THE CAMERAS ARE IN A TYPICAL MOUNTING CONFIGURATION WHERE
THEY MAY BE ABLE TO ROTATE BUT NOT TRANSLATE. IF THE CAMERAS HAVE MOVED IN A DIFFERENT WAY WHERE THE
BASELINE CHANGES SIGNIFICANTLY, THIS PROCEDURE CAN CAUSE SCALE ERRORS IN YOUR RESULTS. YOU MAY ALSO
CORRECT A CALIBRATION USING THE POINT DISTANCE OPTION, IF A KNOWN DISTANCE IS PRESENT ON YOUR SPECIMEN AS
IN PROCEDURE 1.
SUPPORT
If you have any questions about this Application Note or any other questions, comments, or concerns about our software,
please feel free to contact us at support@correlatedsolutions.com, or visit our web site at www.correlatedsolutions.com
.
To Next Page
Loading...
Need help?
General
