Corsair Hydro Series Installation Guide

5
HG10 – N780 Edition
2. Remove the stock blower
3. Install the stock blower
Now that the stock blower has been unplugged, remove the stock blower from the heatsink by unscrewing the
three screws underneath the blower. Make sure to keep the screws from the stock heatsink, we will use these
for the next step.
Next, route the stock fan blower cable through the HG10 bracket and secure the blower to the bracket using
the same screws from the previous step.

Corsair Hydro Series Specifications

General

Type	Liquid CPU Cooler
Radiator Size	120mm, 240mm, 280mm, 360mm
Compatibility	Intel LGA 115x, 1200, 1700, 2011, 2066; AMD AM4
Noise Level	10 - 36 dB
Warranty	5 years
Fan Speed	600 - 2400 RPM