To Next PageTo Next PageWhy is my Cosmo COS-244AGC burner not working?
If the burner on your Cosmo Ranges isn't working, there might be air in the gas line. To fix this, turn on any one of the surface burner knobs to release the air. Also, make sure the control knob is correctly set by pushing it in before turning it to a setting. Check the burner ports to ensure they are clean; if clogged, use a toothbrush or paper clip to clean them.
Why are the flames on my Cosmo COS-244AGC burner uneven and yellow?
Uneven, yellow, or noisy flames on your Cosmo Ranges burner could be due to several reasons. First, check the burner ports to ensure they are clean; if they're clogged, use a toothbrush or paper clip to clear them. Make sure the burner caps are correctly positioned so that the alignment pins align with the slots. If you are using liquid propane, have a qualified technician convert the range to LP gas.
Why are the burner flames on my Cosmo COS-244AGC too high?
If the burner flames on your Cosmo Ranges are too high or too low, check that the range is set up for the correct gas type, as it comes set up for natural gas. Contact a qualified technician if you want to set up LP. Also, verify that the pressure regulator is installed correctly and that the gas line pressure is correct.
General
