26
Install Range Hood
1. Using 2 or more people, hang range hood on mounting bracket through
the mounting slots on back of range hood.
2. Check and verify the round damper is properly installed into the duct
opening of the range hood.
3. For ducted installations only: Connect one end of 6" round aluminum
duct to the top duct opening of the range hood, and the other end to the
existing duct system. Seal connections with clamps or HVAC foil tape (not
included).
4. Plug range hood into a grounded 3-prong outlet.
WARNING EXCESSIVE WEIGHT HAZARD
• Use two or more people to move and install range hood.
• Failure to do so can result in back or other injury.
• Disconnect power before servicing.
• Replace all parts and panels before operating.
• Plug into a grounded 3-prong outlet.
• Failure to do so can result in death, fire, or electrical shock
ELECTRIC SHOCK HAZARD WARNING
To Next Page
Loading...
Need help?
General
