4. Screw the regulator cap back into the regulator and reattach the regulator to the
STEP 2 - CHANGE BURNER ORIFICES
IMPORTANT:
the Burner Chart earlier in this section.
NOTE:
possibility that some may not be replaced.
1. Remove the burner grates, burner caps and burner heads.
2.
a
a
Triple Ring Burner
5
Semi-Rapid Burner
Rapid Burner
1 Each
3.
4. Replace the burner bases, heads, caps and top grates. Make sure burner caps are
properly seated on the burner head.
To Next Page
Loading...
Need help?
General
