YHC 700 7. YHC Configuration
• If YHC has a local address (LAN) and does NOT have access to the Internet, public
DNS services cannot be used (you must have a local DNS service).
7.2.3.2 Serial ports
This section allows you to specify, for each of the RS485 buses, whether or not YHC700
should be considered a bus terminator.
7.2.3.3 Language and Timezone
This page allows you to set the language used in the HMTL pages, as well as the time zone to
be considered when recording the data that will be sent to the cloud and/or that will be used in
the dataloggers (YLC instantaneous datalogger or the monitoring device datalogger).
NOTE: after changing the language, you may need to reload the HTML page to make
changes effective.
7.2.3.4 Date and Time
27
To Next Page
Loading...