5
ENGLISH
!
• Never use thelog splitter in therain or in extreme humidity.
• Never use thelog splitter ( if thepower cable or other parts are damaged. Defective part must be replaced
by anexpert.
• Keep theworking space clean and make sure that theelectric motor cooling is not hindered by rubbish
covering thecooling flange or thecooling air intake.
• Note! Unscrew theair screw (15) 3–4 revolutions so that anoticeable air current can be felt during use.
Otherwise theseals in thehydraulic system may be damaged and make thelog splitter unfit for use.
• Before use, ensure that thepush rod nuts are fastened as thelog splitter might be damage otherwise.
2.1 Product markings and safety symbols on the machine
Warning! Risk of injury from moving parts. Beware. Keep hands away from moving parts during
the entire splitting process.
Warning! Risk of injury from moving parts when removing ajammed log. Do not remove it with your
hands - use atool.
Warning! Risk of injury from moving parts. Always be aware of how thepressure plate moves.
It is forbidden for anyone but themachine operator to be within theworking area of themachine.
Keep children, pets and unauthorized personnel out of theworking area of themachine.
Switch off themachine and disconnect theplug from thesocket when not using themachine, before
cleaning and service.
Consider theenvironment, take care of waste oil according to local environment rules.
Ensure that themachine is not damaged before use. Check once again that thepower cable is
undamaged, if there are any loose screws/nuts and that theoperating levers work well.
Read themanual.
Read theentire manual and try to understand themachine’s work cycle.
Use safety goggles! Protect your eyes against shooting wood chips. Use safety goggles or avisor.
Use gloves.
Use safety boots.
Use safety boots with steel toe caps which protect against falling objects.
To Next Page
Loading...
Need help?
General
