Cotes C35 - Page 11

COTES C35 OPERATING AND SERVICE HANDBOOK page 11/71
Operating conditions – Cold store models (C)
For the process and regeneration air inlet, the following operating conditions must be respected:
Relative humidity 0–100%
Temperature process -25 - 0°C (can be used up to 40 C)
Temperature regeneration -25 - 40°C
Pressure Ambient ± 100 Pa
It is only possible to deviate from these ranges if such deviations were specifically mentioned when
the order was placed, and special considerations have been incorporated into the unit in order to deal
with this.
NOTE
Operating conditions for the air inlet flows must be respected.
Storage conditions
For storing the dehumidifier, the following conditions must be respected:
Relative humidity 0–90%
Temperature -20°C to 50°C
It is only possible to deviate from these ranges if such deviations were specifically mentioned when
the order was placed, and special considerations have been incorporated into the unit in order to deal
with this.
NOTE
Storage conditions for the dehumidifier must be respected.