COTES C35 OPERATING AND SERVICE HANDBOOK page 40/71
SECTION 5 / OPERATION
HOW TO OPERATE WITH BASIC-PLR BASED DEHUMIDIFIER
Configuration-Basic PLR is designed for maximum dehumidification, and the standard setting is that it
is kept running at all times. This configuration is kept as simple as possible, which is why there is no
dehumidification management installed.
STARTING THE DEHUMIDIFIER
Rotate main switch to power on dehumidifier. After a short period, the dehumidifier is ready to operate.
When the main switch is on, the integrated LED strip displays a single green diode at the lower end of
the strip.
To turn the dehumidifier on, press the button on the left of the main switch. Press the button again to
turn the dehumidifier off.
When the dehumidifier is operating, the entire LED strip is green.
HOUR COUNTER
Mechanical hour counter located on the front of the machine counts time, which machine is
dehumidifying.
To Next Page
Loading...
