COTES C35 OPERATING AND SERVICE HANDBOOK page 31/71
SECTION 4 / INSTALLATION
HOW TO INSTALL A C35 DEHUMIDIFIER
Removing the packaging
Cotes C35 dehumidifier units are delivered in a wooden box. Please dispose of this packaging
responsibly, and recycle it if possible.
Handling
Cotes dehumidifiers are built to be very robust, so there is no need for special handling, apart from
normal sensible care and attention.
Note the weight of the dehumidifier as specified on page 21. We recommend that you use a forklift to
move the dehumidifier around and place it in position.
Where to mount this dehumidifier
Cotes adsorption dehumidifiers are designed for installation indoors.
The back of the dehumidifier should be placed against an outer wall to make it easier to install the
regeneration air ducts.
The three other sides of the unit should have at least 1 metre of unobstructed access, for easy
service and maintenance.
Where not to mount it
Unless it has been arranged with Cotes and special considerations have been made, the unit should
not be placed outdoors.
The unit should not be placed inside an office or in other locations where the sound pressure level
must be kept to a minimum.
To Next Page
Loading...
