COTES C35 OPERATING AND SERVICE HANDBOOK page 9/71
Configuration priorities
The Cotes C35 range is available with four different control configurations – Configuration-A,
Configuration-B, Configuration-C and Configuration-D.
Control configuration-A is stripped down to a minimum of features and is therefore not equipped with
a PLC screen interface.
Configuration-A/ BASIC PLR
The Configuration-A provides:
• High dehumidification capacity
• High energy efficiency
• Stainless steel cabinet
• Easy installation
• Low-noise running
• Low maintenance costs, reducing the overall operating cost
• Easy cleaning
• Hour counter, to keep track of how long the unit has been in operation
• Attachment of external humidity sensor (external humidify control and sensors are not
included as standard, but are available for purchase from Cotes)
• Over-heating alarm
• Remote start/stop option
• External fault signal and operation signal
Configuration-B
In addition to the Configuration-A features, the Configuration-B provides:
• Attachment of one external humidity sensor
• 3.5-inch touch display
• Service indication, to keep track of any need for maintenance
• Hour counter, to keep track of how long the unit and components has been in operation
• Mechanical service alarm for rotor and filters
• Control of regeneration air fan, making installation easier
• Capacity control / modulating heat control
• Measuring and controlling dew point temperature
• Datalogging for keeping track of conditions in the space where the unit is installed
• Timer program
• Network connectivity (optional)
• Monitoring and control via smartphone app (optional)
• Monitoring and control by Cotes service centre (optional)
To Next Page
