EasyManua.ls Logo

Cotes LIGHTWEIGHT CL26 - Installation and Commissioning; How to Install this Dehumidifier

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COTES LIGHTWEIGHT - USER MANUAL
9/18
Cotes dehumidifier: CL26
Manual number: 140778
Revision: A
COTES.COM
4 / INSTALLATION AND COMMISSIONING
4.1 HOW TO INSTALL THIS DEHUMIDIFIER
Safety precautions
NOTE
Electrical work should only be carried out by an authorised electrician,
and in accordance with national wiring regulations.
Any duct connections to and from the dehumidifier should only be carried out by an authorised ventilation
installer. Only use appropriate power cable and accessories made for this dehumidifier.
Where to mount this dehumidifier
NOTE
The dehumidifier must be placed indoors in stationary installations
and protected against rain and water on the cabinet.
The dehumidifier should be:
1. Installed indoors, placed on a horizontal based surface.
2. Placed on the four rubber supports underneath the cabinet.
The dehumidifier must:
1. Not be mechanically affected by other adjacent structures.
2. Have a minimum distance of 10cm to other structures.
Installation above sea level: Max. 3000 meter.
Where not to mount it
Unless it has been arranged with Cotes and special considerations have been made, the unit should not be
placed outdoors.
The unit should not be placed inside an office or in other locations where the sound pressure level must be kept
to a minimum.