DELETE MEMORY CHANNELS
Method 1: MANUAL DELETING MEMORY
1. Turn on the radio and press the [VF/VM] button causing PRESET stations appears in the
display's upper right corner.
2. Rotate the [TUNING] knob to select the memory that you want to delete.
3. Long press [DEL.] button with " " flashing in the display, press the [DEL.] button
again to confirm.
Note: If " " is flashing more than 3 seconds without confirmation, it will exit the delete
function automatically.
Method 2: SEMI AUTO-DELETE MEMORY
In VM mode, long press the [VF/VM] button to activate the Auto-Browse function of memory.
Once previewing your
unwanted station, simply press the [DEL.] button with " " shows for 2 seconds and
then keep on browsing other stations. To stop the browsing
function, quickly press the [VF/VM] button to exist.
Method 3: DELETE ALL MEMORY
Quickly press the [VF/VM] button to enter VM / Memory mode,
long press the [DEL.] button for 3 seconds with " "
shows on the upper right corner of the display, press again the
[DEL.] button to remove all memory.
Note: If " " is flashing more than 3 seconds without
confirmation, it will exit the delete function automatically.
SLEEP FUNCTION
1. In POWER OFF mode, press & hold the [POWER] button
until the sleep timer symbol “ ” flashes on the display.
2. Rotate the [TUNING] knob immediately to select a sleep
timer from 1 - 120 minutes, or select “ ” for POWER ON
mode (NO sleep timer).
Note: The default setting of the sleep timer is “ ”.
To Next Page
Loading...
