Method 2: MANUAL TUNING
Turn on the radio, quickly press the [VF/VM] button to switch into frequency mode. Rotate the
[TUNING] knob to select your station.
FAST/SLOW tuning is shown in the chart below for each band.
Method 3: AUTO BROWSE- STATION
1. Turn on the radio and quickly press the [VF/VM] button with
the frequency flashing.
2. Long press the [VF/VM] button to scan from one station to
another, staying on each station for about 5 seconds.
3. To stop auto browse function, simply press the [VF/VM]
button.
Note: When the radio is searching & stops at a station, just
press [MEM.] button once to store it in memory.
Method 4: AUTO BROWSE- MEMORY
Note: Read [Working with Memory] before using this function.
1. Turn on the radio, quickly press the [VF/VM] button with
memory page shows in the upper right corner and disappears
in 5 seconds.
2. Long press [VF/VM] button with " PRESET " flashing to
scan from one preset memory to another, staying on each
station memory for about 5 seconds.
3. To stop auto search memory, simply press the [VF/VM]
button.
To Next Page
Loading...
