28 February 2017 Operation and Maintenance
CY460_Operational_Manual_405 Page 75 of 218
Definitions for:
"Pattern F1L7 = On" (“Pattern F1L10” for NTSC)
"Black F1L7 = On" (“Black F1L10” for NTSC)
These menu items allow the user to control whether the F1L7 (Field 1 Line 7) or F1L10 (field
1 Line 10) ident signals appear on the Composite 1, Black 1 and Tri-Black video output
signals. The F1L7 signal is defined for the PAL format, the F1L10 signal for NTSC.
The options in the field “On” are:
Off F1L7 / F1L10 does not appear on the selected video output.
On F1L7 / F1L10 appears on the selected video output.
Definition for:
"No S318M in this format...."
This menu line appears on the Composite menu (NTSC version) to indicate that the S318M
ident signal is not defined for this output.
Definition for:
"Black S318M = On"
This menu line allows the user to control whether the S318M ident signal appears on the
Black 1 or Tri-Black video output signals. This signal is only defined for colour black in the
NTSC format (see SMPTE 318M-1999).
The options in the field “On” are:
Off S318M does not appear on the selected video output.
On S318M appears on the selected video output.
To Next Page
Loading...