28 February 2017 Installation and Planning
CY460_Operational_Manual_405 Page 37 of 218
Calibration Settings
The Calibration Menu can be reached via the < –System Setup > menu option.
This menu screen lists the system calibration values for the CY460 SPG.
Changes to this menu are extremely unlikely to occur, and so no formal description will be
outlined here. For the purposes of this functional check, simply scroll through the menu to
check for any corrupted entries. Refer to the relevant pages in Section 3.6 : System Setup
Menu for details of the various options.
Return to the Top Level menu using the [ Back ] button.
This completes the Functional Check Procedure for the CY460 Sync Pulse and Test Pattern
Generator.
Operational Configuration
There are several configuration factors that will influence the initial installation of your CY460 Sync
Pulse and Test Pattern Generator, namely:
Mains Power
Time, Date, DST etc.
Video & Audio outputs.
References (Genlock, 10MHz, GPS, NTP, etc).
Network.
Connection to CY465 SPG Changeover unit.
The user should refer to the various sections of this manual that explain each of these features, so that
they may correctly configure the CY460 SPG to their requirements.
To Next Page