If it is your first time to use the device, please set a login password of admin (system default user).
Note
For your device safety, please keep your login password of admin well after the initialization
steps and change the password regularly.
Steps:
a. Boot up device.
Device displays device initialization interface. See Figure 2-1
Figure 2-1
b. Set login password of admin.
• User name: The default user name is admin.
• Password/confirm password: The password ranges from 8 to 32 digitals. It can
contain letters, numbers and special characters (excluding “.”, “,”, “;”, “:”, “&”. The
password shall contain at least two categories. Usually we recommend the strong
password.
• Prompt question: If you set the prompt question here. On the login interface, click,
device can display the corresponding prompt question for you to remind the
password.
WARNING
STRONG PASSWORD RECOMMENDED-For your device own safety, please create a
strong password of your own choosing. We also recommend you change your password
periodically especially in the high security system.
To Next Page
Loading...
