2.14.3.2 Schedule
2.14.3.2.1 Recor
d Note:
You need to have proper rights to implement the following operations. Please make sure the
HDDs have been properly installed. After the system booted up, it is in default 24-hour
regular mode. You can set record type and time in schedule interface. In the main menu,
from Setting Storage Schedule, you can go to schedule menu. See Figure 2-116.
Please note you need to go to main menu Setting System General Holiday to set
holiday date first, otherwise, there is no holiday setup item.
Channel: Please select the channel number first. You can select “all” if you want to set
for the whole channels.
: Sync connection icon. Select icon of several dates, all checked items can be
edited together. Now the icon is shown as .
Click it to delete a record type from one period.
Record Type: Please check the box to select corresponding record type. There are four
types: Regular/MD (motion detect)/Alarm/MD & Alarm.
Week day: There are eight options: ranges from Saturday to Sunday and all.
Holiday: It is to set holiday setup. Please note you need to go to the General interface
(Main Menu->System->General) to add holiday first. Otherwise you cannot see this
item.
Pre-record: System can pre-record the video before the event occurs into the file. The
value ranges from 1 to 30 seconds depending on the bit stream.
Redundancy: System supports redundancy backup function. You can highlight
Redundancy button to activate this function. Please note, before enabling this function,
please set at least one HDD as redundant. (Main menu->Setting->Storage->HDD
Manager). Please note this function is null if there is only one HDD.
Period setup: Click button after one date or a holiday, you can see an interface shown
as
in Figure 2-6.There are four record types: regular, motion detection (MD), Alarm, MD & alarm.
Please following the steps listed below to draw the period manually.
Select a channel you want to set. See Figure 2-114.
Figure 2-114
Set record type. See Figure 2-115
Figure 2-115
To Next Page
Loading...
