channel 1. Now you can select the channel you want to paste such as channel 5/6/7. If you
want to save current setup of channel 1 to all channels, you can click the first box “ALL”.
Click the OK button to save current copy setup. Click the OK button in the Encode interface,
the copy function succeeded.
Please note, if you select ALL in Figure 2-119, the record setup of all channels is the same
and the Copy button becomes hidden.
Figure 2-119
Click OK button to save current setup.
2.14.3.2.2 Snapshot
On the preview interface, right click mouse and then select Manual Record, or in the
main menu, from Setting Storage Record, check the box to enable snapshot
function of corresponding channels. See Figure 2-120
In main menu, from Setting Camera Encode Snapshot interface, here you can input
snapshot mode as regular, size, quality and frequency. See Figure 2-121.
In main menu, from Setting Camera Storage Schedule interface, please
enable snapshot function. See interface on the right of Figure 2-122.
Please refer to the following figure for detailed information.
To Next Page
Loading...
