Figure 2-126
Tips
You can check all buttons after the corresponding status to enable/disable all-channel
snapshot function.
2.14.3.6 HDD Detect
The HDD detect function is to detect HDD status so that you can clearly understand the
HDD performance and replace the malfunction HDD.
There are two detect types:
Quick detect is to detect via the universal system files. System can quickly complete the
HDD scan. If you want to use this function, please make sure the HDD is in use now. If
the HDD is removed from other device, please make sure the write-data once was full
after it installed on current device.
Global detect adopts Windows mode to scan. It may take a long time and may affect the
HDD that is recording.
2.14.3.6.1 Manual Detect
The manual detect interface is shown as below. See Figure 2-127.
Please select detect type and HDD. Click start detecting to begin. You can view the
corresponding detect information. See Figure 2-128.
To Next Page
Loading...
