In the main menu, from Setting Storage Record.
In live viewing mode, click record button in the front panel or record button in the
remote control.
System supports main stream and sub stream. There are three statuses:
schedule/manual/stop. See Figure 2-125. Please highlight icon “○” to select corresponding
channel.
Manual: The highest priority. After manual setup, all selected channels will begin
ordinary recording.
Schedule: Channel records as you have set in recording setup (Main Menu Setting System
Schedule)
Stop: Current channel stops recording.
All: Check All button after the corresponding status to enable/disable all-
channel schedule/manual record or enable/disable all channels to stop
record.
Figure 2-125
2.14.3.5.2 Snapshot Operation
Check the corresponding box to enable/disable schedule snapshot function. See Figure 2-126.
To Next Page
Loading...
