2.14.4.2 Display
2.14.4.2.1 Display
Display setup interface is shown as below. See Figure 2-135.
Time display: You can select to display time or not when system is playback.
Channel display: You can select to channel name or not when system is playback.
Original rate: Check the box here, the video can be displayed at its actual size.
Transparency: Here is for you to adjust menu transparency. The higher the value is,
the more transparent the menu is.
Resolution: There are four options: 1920×1080, 1280×1024(default), 1280×720, 1024×768.
Please note the system needs to reboot to activate current setup.
Preview enhance: Check the box; it can optimize the video quality of the
preview video. Please highlight icon to select the corresponding function.
After completing all the setups please click save button, system goes back to the previous menu.
Figure 2-135
2.14.4.2.2 TV
Adjust Note
This function is for some series only. Here is for you to adjust TV output setup. See
Figure 2-136. Please drag slide bar to adjust each item.
After all the setups please click OK button, system goes back to the previous menu.
To Next Page
Loading...
