About user account and MAC. When you add a new user, you can input the MAC
address of current user. Only the user of the same MAC address can access the device
remotely. (MAC address is for the device of the same LAN.) If you leave MAC address
item in blank when you add a new user, the user of any MAC address can access the
device remotely. You can set or change MAC address when you add or modify a user.
The MAC address function is also valid for KVMS PRO login. Please note current
function does not support IPV6.
After all the setups please click save button, system goes back to the previous menu.
Figure 2-144
To Next Page
Loading...
