2.14.4.6.1 Add User
Click modify user button in Figure 2-144, the interface is shown as in Figure 2-
145 Please input the user name, password, select the group it belongs to from the
dropdown list. Then you can check the corresponding rights for current user.
For convenient user management, usually we recommend the general user right is lower
than the admin account.
Username: admin. Password: admin. (administrator, local and network)
Username: 888888. Password: 888888. (administrator, local only)
Username: default. Password: default (hidden user). Hidden user “default” is for system
interior use only and cannot be deleted. When there is no login user, hidden user
“default” automatically login. You can set some rights such as monitor for this user so
that you can view some channels without login.
Figure 2-145
When you create a new user, you can input the corresponding MAC address of current user.
If you leave this item in blank, any MAC address user can share this user account to login.
Please note system needs to check the validity of MAC. Only the 12-digit 0-f format address
can pass the validity verification. System only saves small character even you input
capitalized one. You can see the corresponding prompt if there is any illegal input.
Click the Set button after the period, you can set valid period to use current account. See
Figure 2-146.
To Next Page
Loading...
