startup wizard.
When there are all analog channels, the startup wizard includes general, encode,
schedule, record control, network, INSTAON.
When there is an IP channel, the startup wizard includes general, network, INSTAON,
remote device and schedule.
Click OK button, you can go to General interface. See Figure 2-14. For detailed information,
please refer to chapter 2.12.4.1.
Figure 2-14
Note
You can only see the remote device interface if you have set IP channel (Chapter 2.10.3.3.4)
Click Next button, you can go to network interface. See Figure 2-15. For detailed information,
please refer to chapter 2.11.3.
To Next Page
Loading...
