2.6.3.1 PTZ Function Setup
Click , you can go to the following interface to set preset, tour, pattern, and scan. See
Figure 2-28.
Figure 2-28
Preset Setup
In Figure 2-28, click preset button and use eight direction arrows to adjust camera to the
proper position. The interface is shown as in Figure 2-29. Click Set button and then input
preset number. Click Set button to save current preset.
Figure 2-29
Tour Setup
In Figure 2-28, click tour button. Input tour value and preset no. Click Add preset button
to add current preset to the tour. See Figure 2-30.
To Next Page
Loading...
