CP Plus Cosmic - Page 31

28
Border Setup
In Figure 2-28, click Scan button. Use direction buttons to set camera left limit and then click
Left button. Use direction buttons to set camera right limit and then click Right button. Now
the scan setup process is complete.
Figure 2-32
2.6.3.2 Call PTZ Function
Call Preset
In Figure 2-27, input preset value and then click to call a preset. Click again
to stop call.
Call Pattern
In Figure 2-27, input pattern value and then click to call a pattern. Click again
to stop call.
Call Tour
In Figure 2-27, input tour value and then click to call a tour. Click again to stop call.
Call Scan
In Figure 2-27, input Scan value and then click to call a tour. Click again to stop call.
Rotate
In Figure 2-27, click to enable the camera to rotate. System supports preset, tour,
pattern, scan, rotate, light and etc function.