CRADLEPOINT COR | USER MANUAL Firmware ver. 5.0.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 91
Match and Set: Both of these have the following configuration options:
• IP address: Input an IP address with this policy.
• Metric: Numerical priority of the route.
• Community: The BGP community list is a user-
defined BGP communities attribute list. The BGP
community list can be used for matching or
manipulating BGP communities attribute in
updates.The community attributes are a 32-bit
number that also has some aliases.
o internet: alias for well-known communities
value 0
o no-export: alias for well-known communities
value NO_EXPORT (0xffffff01)
o no-advertise: alias for well-known communities value NO_ADVERTISE (0xffffff02)
o local-AS: alias for well-known communities value NO_EXPORT_SUBCONFED (0xffffff03)
Match: This specifies the policy implied if the `Matching Conditions' are met or not met, and which actions of the route
map are to be taken, if any. The two possibilities are:
1. Permit: If the entry matches, then carry out the `Set Actions'. Then finish processing the route map, permitting the
route, unless an `Exit Action' indicates otherwise.
2. Deny: If the entry matches, then finish processing the route-map and deny the route (return `deny').
Set: A route-map entry may, optionally, specify one or more `Set Actions' to set or modify attributes of the route.
To Next Page
Loading...
