CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 105
6.7.4 RIPNG Routing
RIP (Routing Information Protocol) RIPng (RIP next generation) extends RIPv2 to support IPv6. See RIPng on Wikipedia
and RFC 2080 for details.
RIPNG Editor
• Name: Unique name of the policy.
• Metric: RIPng metric is a value for distance for the
network. Usually RIP increments the metric when the
network information is received. The metric for
redistributed routes is set to 1.
• Enabled: Click to enable/disable the policy. (Default:
enabled.)
Networks: Set the RIPng-enabled interfaces by network using
IPv6 addresses. RIPng is enabled on the interfaces that have
addresses within the network range.
To Next Page
Loading...
