Cradlepoint MBR1400 - Network Mobility (NEMO)

CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 182
7.7 Network Mobility (NEMO)
NOTE: NEMO requires a feature license and hardware version 2.0. Go to System Settings → Feature Licenses to enable this feature.
Network Mobility (NEMO) is an Internet standards track protocol defined in RFC 5177. The protocol allows session
continuity for every node in a mobile network as the network moves.
This is a licensable feature. Without a valid license,
settings can be configured, but will not be implemented.
See System Settings → Feature Licenses for more
information.
NEMO requires a service provider, e.g. Verizon Wireless
Private Network with DMNR (Dynamic Mobile Network
Routing). Your NEMO service provider will define many
of the settings for your NEMO configuration.
Once you have a NEMO service provider and a valid
feature license, add networks to the Networks Routed
by NEMO section by first clicking Add. In the popup
window, input:
• Network Address
• Netmask
The Network Address and Netmask, or subnet mask,
together define a range of IP addresses that comprise
the local network you want associated with the NEMO
settings.
7.7.1 Network Mobility (NEMO) Settings
Home IP Address and Home Netmask – These may be
provided by your NEMO service provider. The IP address
is a placeholder, “dummy” address; any IP address can
be used (1.2.3.4 is common).