CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 173
7.4.1 Data Usage Rules
The Date Usage Rule display shows basic
information for each rule you have created
(including rules created with a template). The
following information is displayed:
• Rule Name
• Enabled: True/False
• Date for Rule Reset
• Cycle Type: Daily, Weekly, or Monthly
• Cap: Amount in MB.
• Current Usage: Shown as an amount
in MB, as a percentage of the cap, and
in a bar graph.
Click Add to configure a new Data Usage Rule.
Data Usage Rule – page 1
Rule Name: Give your rule a name for later recognition.
WAN Selection: Select from the dropdown list of currently
attached WAN devices.
Assigned Usage in MB: Enter a cap amount in megabytes.
1024 megabytes equals 1 gigabyte.
Rule Enabled: (Default: Enabled.) Click to disable.
Use with Load Balancing: When checked, the Load Balancing
feature is allowed to use the thresholds and metrics of this rule
when making balance decisions. This causes Load Balancing to
spread the data usage between interfaces according to the
assigned usage rather than bandwidth. This is a best effort to
To Next Page
Loading...
