Cradlepoint MBR1400 - Page 235

CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 233
8.2.1 SMTP Mail Server
Since the MBR1400 does not have its own email server, to receive alerts you must enable an SMTP server. This is possible
through most email services (Gmail, Yahoo, etc.)
Each SMTP server will have different specifications for setup, so you have to look those up separately. The following is an
example using Gmail:
• Server Address: smtp.gmail.com
• Server Port: 587 (for TLS, or
Transport Layer Security port; the
MBR1400 does not support SSL).
• Authentication Required: For
Gmail, mark this checkbox.
• User Name: Your full email
address
• Password: Your Gmail password
• From Address: Your email
address
• To Address: Your email address
Once you have filled in the information for the SMTP server, click on the “Verify SMTP Settings” button. You should
receive a test email at your account.