Cradlepoint MBR1400 - Page 245

CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 243
• 1200
• 1800
• 2400
• 4800
• 9600
• 19200
Byte Size: The number of bits in a byte. Select from: 5, 6, 7, and 8.
Parity: Change this value to enable parity bit checking. Select from the following dropdown options:
• None: No parity checking. (Default)
• Even: parity bit will always be even.
• Odd: parity bit will always be odd.
• Mark: parity bit will always be odd and
always 1.
• Space: parity bit will always be even
and always 0.
Stop Bits: Number of bits to initiate the stop
period. Select from these dropdown values:
1, 1.5, and 2.
Hardware (RTS/CTS): Use RTS (Request To Send)/CTS (Clear To Send) to enable flow control.
Software (XON/XOFF): Use XON/XOFF to enable flow control.
Linefeed: Select how you want linefeeds translated (CR = carriage return and LF = line feed).
• Ignore
• CR/LF
• CR
• LF