CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 5.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 50
Local Networks: “Detailed Info” links to Network Settings → WiFi / Local Networks.
• Clients: The number of current clients
For each network, the following information is displayed:
• Network Name: IP Address/Netmask
o Route Mode: NAT (Network Address Translation), Standard (NAT-less), Hotspot, or Disabled
o Access: Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP
To configure a network, see Network Settings → WiFi / Local Networks.
WiFi Networks: “Detailed Info” links to Network Settings → WiFi / Local Networks.
• WiFi Radio: Channel: 1-11 for 2.4 GHz; 36, 40, 44, 48, 149, 153, 157, 161, or 165 for 5 GHz; Transmit Power
(expressed as a percentage)
For each WiFi network, the following information is displayed:
• SSID: Service Set Identifier, an identifier for a wireless network
o Security: WPA2/WPA1/WEP Personal/Enterprise or Open; Isolated Clients
o Network: The name of the local network
To Next Page
Loading...
