Craftsman 113.213090 User Manual

f Save ThisManual "_
I For FutureReference
MODEL NO.
113.213090
DRILL PRESS WITH
MAXIMUM DEVELOPED
1/2 HP MOTOR
Serial
Number
Model and serial number
may be found at the rear of
the head.
You should record both
model and serial number in
a safe place for future use.
CAUTION:
READ ALL
iNSTRUCTIONS
CAREFULLY
BENCH
MOTORIZED
10-INCH
MODEL DRILL PRESS
• assembly
• operating
e repair parts
",... .j ../
Sold by SEARS, ROEBUCK AND CO., Chicago, IL 60684 U.S.A.
Part No. SP5t85 Printed in Taiwan

Craftsman 113.213090 Specifications

General

Brand	Craftsman
Model	113.213090
Category	Power Tool
Language	English

Summary

General Safety Instructions for Power Tools

Know Your Power Tool

Understand tool application, limitations, and potential hazards before use.

Ground All Tools

Ensure tool is properly grounded using a 3-conductor cord and grounding plug.

Personal Protective Equipment

Wear safety goggles, appropriate apparel, and tie back long hair.

Additional Safety Instructions for Drill Presses

Drill Press Specific Precautions

Covers stability, location, kickback, and accessory usage specific to drill presses.

Protection of Body Parts

Details necessary protection for eyes, hands, face, ears, and body from hazards.

Motor Specifications and Electrical Requirements

Connecting to Power Source Outlet

Guidance on proper grounding, outlet types, and extension cord usage.

Unpacking and Checking Contents

Location and Function of Controls

Operation Controls: On/Off and Bevel Scale

Details the drill's ON-OFF switch and how to read bevel scale.

Assembly of Base and Column

Base and Column Support Assembly

Instructions for assembling the base and column support.

Table Support Installation

Steps for installing the table support assembly onto the column.

Head Assembly Installation

Installing the Drill Press Head

Feed Handles and Chuck Installation

Installing the Drill Chuck

Belt Guard and Belt Tensioning

Tensioning the Drive Belt

Getting to Know Your Drill Press

Basic Drill Press Operation

Personal Protection During Operation

Installing and Securing Drill Bits

Workpiece Positioning and Support

Adjustments

Quill Return Spring Adjustment

Trouble Shooting

Addressing Noisy Operation and Drill Issues

Solutions for noisy operation, drill burning, and off-center holes.

Resolving Workpiece and Drill Binding Problems

Tips for preventing workpiece tearing, drill binding, and runout.

Troubleshooting Quill and Chuck Issues

Solutions for slow quill return and chuck attachment problems.

How to Order Repair Parts

Ordering Information and Procedures